Front Suspension

SWAY BAR, FRONT, 5/8 IN

BUSHING, FRONT SWAY BAR RUBBER PRESS IN, 1977-1980, MGC. Required: 2

LINK, FRONT RH SWAY BAR

BOLT -S-34,7/16"-20 X 1 3/4 INCH, sway bar to link. Required: 2

MOUNT, RUBBER, FRONT SWAY BAR BUSHING 9/16 IN BAR, MGB 1962-1974.5, CHROME BUMPER CARS. Required: 2

BRACKET, SWAY BAR RUBBER MOUNT, FRONT & REAR ON MGB. Required: 2

CLAMP SET, LOCATOR, PAIR, SWAY BAR ASSEMBLY MGB 1962-1974.5 CHROME BUMPER CARS, TR3, TR4, SPM. Required: 2

LOCATOR CLAMP PAIR, WITH HARDWARE, SWAY BAR, 1975-1980, ALL GT, REAR SWAY BAR 1977-1980

ARM, WISHBONE, FRONT RH LOWER CONTROL ARM, WITH SWAY BAR FITTED

WISHBONE ARM, LOWER, FRONT & REAR ON NON SWAY BAR CARS, RH, LH REAR ON SWAY BAR CARS. Required: 4

ARM, SPRING PAN, LOWER CONTROL ARM, COIL SPRING MOUNT. Required: 2

SPRING, COIL, FRONT TO C293445, ROADSTER 1962-1972. Required: 2

SPIGOT, SPRING LOCATING. Required: 2

PIVOT BOLT, FRONT WISHBONE, REPLACEMENT, USES NUTS 310-410. Required: 2

SPACER, FRONT REBOUND RUBBER. Standard on late cars.
Required: 2

BUFFER, REBOUND, FRONT SHOCK. Required: 2

BOLT, STEERING ARM TO SWIVEL AXLE. Required: 4

AXLE, SWIVEL AXLE, RH, NEW

TRUNNION, suspension link

SHOCK ABSORBER, FRONT, NEW. Required: 2

PAD, MOUNTING PAD, FRONT CROSS MEMBER WITH LIP, UPPER, 4 1962-1974, 6 1975-1980, LOWER FRONT. MGB 4 1962-1974, 6 1975-1980, LOWER FRONT

PAD, MOUNTING PAD, FRONT CROSS MEMBER LOWER REAR, FLAT, 4 1962-1974, 2 1975-1980. 1974 1/2 - 80 uses 2
Required: 4. MGB 4 FOR 1962-1974, 2 1975-1980

BOLT CROSSMEMBER , FRONT & REAR 1962-1974, REAR 1975-1980-. 1974 1/2 - 80 uses 2 in rear mounting holes
Required: 4

PLATE, FRONT CROSSMEMBER MOUNTING. Required: 4

NUT, NYLOC NUT, 1/2-20, STD HEIGHT, FINE THREAD, STEERING ARM, FRONT CROSSMEMBER BOLTS, BRAKE DRUM RETAINING. Included in 661-860 pin assy.
Required: 4

BOLT, FRONT SHOCK ABSORBER MOUNTING, 1962-1974. Required: 8

REPAIR KIT, MAJOR FRONT SUSPENSION KIT, DOES BOTH SIDES

KIT, FULCRUM PIN & BUSHING KIT, UPPER SHOCK TRUNNION BUSHING & BOLT KIT. Required: 2

NUT, SLOTTED, UPPER SHOCK BOLT, MGB, SPM, FULCRUM PIN, ORIGINAL TRUNNIONS, TR3,TR4. Included in 031-390 Top Trunnion kit
Required: 2

BUSHING, mgb upper outer, FULCRUM PIN, spm lower inner CONTROL ARM. Included in 031-390 Top Trunnion kit
Required: 4

THRUST WASHER, UPPER TRUNNION TO KING PIN. Included in major suspension kit & king pin set
Required: 2

BUSHING UPPER,MGB, LOWER SPM KING PIN (MUST BE REAMED TO FIT). Included in major suspension kit & king pin set
Required: 2

BUSHING, LOWER KING PIN, MUST BE REAMED TO FIT. Included in major suspension kit & king pin set
Required: 2

SEAL, SEALING RING, SWIVEL AXLE TO KING PIN, O-RING, SPEEDOMETER DRIVE GEAR HOUSING, SPEEDO BEARING. Included in major suspension kit & king pin set
Required: 2

BOLT KIT, LOWER TRUNNION BOLT, WASHERS, NUT SEALS, SPACER, DOES 1 SIDE. Required: 2

BOLT & NUT SET ONLY, LOWER SWIVEL PIN LINK, LOWER CONTROL ARM. Included with major suspension kit #264-358
Required: 2

BUSHING, MGB LOWER FULCRUM PIN MUST BE REAMED TO FIT KING PIN, UPPER SWIVEL PIN ON MGA, MGT. Included with bottom link & with major suspension kit #264-358
Required: 4

TUBE, DISTANCE TUBE, STEEL, HARDENED, FRONTSUSPENSION. Included with major suspension kit #264-358
Required: 8

WASHER, CUPPED, SUPPORT, FRONT SUSPENSION DUST SEAL. Included with major suspension kit #264-358
Required: 8

WASHER, THRUST WASHER, LOWER DISTANCE TUBE. Included with major suspension kit #264-358
Required: 8

SEAL, RUBBER, FRONT SUSPENSION DUST, LOWER CONTROL ARM. Included in Major Suspension Kit, King Pin Set & Lower Trunnion Kit
Required: 4

NUT, LOWER INNER CONTROL ARM, FRONT AXLE, CASTELLATED, REAR LEAF SPRING FRONT EYE BOLT, TR3, TR4. Required: 4

BUSHING, MGB LOWER FULCRUM PIN MUST BE REAMED TO FIT KING PIN, UPPER SWIVEL PIN ON MGA, MGT. Included with bottom link & with major suspension kit #264-358
Required: 4

WASHER, INNER LOWER CONTROL ARM BUSHING RETAINING. Required: 4

BUSHING SET, LOWER CONTROL ARM INNER, AS ORIGINAL, SET OF 8. Included with major suspension kit #264-358 & suspension rubber kit #281-558

BUSHING SET, V8, LOWER INNER CONTROL ARM ,SET OF 4 PRESS IN, METALASTIC BUSHINGS REPLACES 281-398. As fitted to MGB V8.

DUST TUBE KIT, FRONT SWIVEL AXLE, INCLUDES 2 TUBES AND SPRING. Required: 2

SPRING, DUST EXCLUDER. Required: 2

TUBE, dust excluder, bottom. Included in dust tube kit
Required: 2

SEAL, SEALING RING, DUST EXCLUDER. Required: 2

COLLAR, OIL SEAL, FRONT WHEELS. Required: 2

SEAL, OIL SEAL FRONT WHEEL HUB, OUTER ON MINI. Required: 2

BEARING KIT, FRONT WHEEL. Required: 2

BEARING, FRONT OUTER WHEEL, BJ8 FROM C26705, JAG E-TYPE ALL, XJ6, XJ12 UP TO 1968-1977.5 MGB 1962-1980, MGC. Required: 2

SPACER, DISTANCE PIECE, FRONT WHEEL BEARING, BJ8 FROM C26705, MGB. Required: 2

KIT, SHIM KIT, FRONT HUBS FROM (c)26705

SHIM, FRONT WHEEL BEARING, .003, BJ8 FROM C26705, MGB. Required: A/R

STUD, WIRE WHEEL HUB ADAPTOR, TUBE TYPE AXLE 1965-1980. Included with hub assembly
Required: 8

NUT, WHEEL STUD, NOT ROSTYLE WHEELS, TO C158230, 1962-1967. Required: 8

CAP, GREASE RETAINING, STEEL WHEEL FRONT GREASE CUP. Required: 2

HUB ADAPTOR, FRONT RH WIRE WHEEL 12TPI, RD TO C30850, 1962-1964

WASHER, FRONT WHEEL BEARING RETAINING. Required: 2

NUT, BEARING RETAINING, FRONT WHEEL. Required: 2

CUP, GREASE RETAINER, WIRE WHEEL MGB RD TO C30850 1962-1964. Required: 2

CUP, GREASE RETAINING, WIRE WHEEL, BJ8 FROM C26705, MGB 1965-1980, MGC. Required: 2

ZERK, GREASE NIPPLE, ANGLED, TOP, SPM, MGB, TR4 FROM CT6344 WIRE WHEEL, CT6391 DISC WHEEL, TR4A, TR250, TR6. Required: 2

ZERK, GREASE NIPPLE, straight, YOKE. Included with driveshaft assembly

NUT ,HUB BOLT MGA 1600 DISC WHEEL, BRAKE ROTOR TO HUB, MGB, MGTC REAR GEARBOIX MOUNT. Required: 4

BOLT, CALIPER MOUNTING, FRONT SHOCK ABSORBER MOUNTING, MGB 1975-1980 , MGB ROTOR TO HUB. Required: 8 FRONT SHOCK ABSORBER MOUNTING, MGB 1975-1980 , MGB ROTOR TO HUB ALL YEARS

REAMER, KING PIN BUSHINGS,MGB 1962-1980

ARM, WISHBONE, FRONT LH LOWER CONTROL ARM WITH SWAY BAR FITTED

BAR, SWAY BAR, FRONT, 3/4 INCH DIAMETER, 280% INCREASE,. CAN BE RETRO FITTED TO EARLIER CARS WITH ADDITIONAL PARTS

BAR, SWAY BAR, FRONT, 7/8 INCH DIAMETER, 450% INCREASE. CAN BE RETRO FITTED TO EARLIER CARS WITH ADDITIONAL PARTS

BEARING, FRONT INNER WHEEL, BN2-BN6 WIRE WHEELS, BN7 THRU BJ8, ALL E-TYPES, XJ6, XJ12 1968-1977.5, DIFF CARIER SPIT 1971-1976,. Required: 2

BOLT, CALIPER MOUNTING, FRONT SHOCK ABSORBER MOUNTING, MGB 1975-1980 , MGB ROTOR TO HUB. Required: 8 FRONT SHOCK ABSORBER MOUNTING, MGB 1975-1980 , MGB ROTOR TO HUB ALL YEARS

BOLT, STUD FRONT CROSSMEMBER, FRONT 1975-1980, RUBBER BUMPER CARS. Required: 2 USED WITH 264-910 ON 1975-1980

BUSHING, NYLATRON, MGB FRONT UPPER OUTER SHOCK TO TRUNNION, SPM LOWER INNER CONTROL ARM, HARD PLASTIC. MGB REQUIRES 4 BUSHINGS SPM REQUIRES 8 BUSHINGS. Required: 2

BUSHING, RUBBER MOUNT, for 3/4 INCH DIAMETER FRONT SWAY BAR. Required: 2

BUSHING, SWAY BAR MOUNT 5/8 INCH DAIMETER BAR, 100M, BN4 THRU BJ8, MGB 1975-1980, RUBBER BUMPER CARS. Required: 2

HUB ADAPTOR, FRONT LH WIRE WHEEL 12TPI, RD TO C30850, 1962-1964

HUB ADAPTOR, FRONT LH WIRE WHEEL 8TPI, 1965-1980

HUB ADAPTOR, FRONT RH WIRE WHEEL 8TPI, FROM C30851, 1965-1980

INSTALLATION KIT, 3/4 INCH FRONT SWAY BAR FOR CARS NOT ORIGINALLY FITTED WITH SWAY BAR -. HARDWARE TO INSTALL A SWAY BAR ON A CAR NOT EQUIPPED WITH 1. DOES NOT INLUDE SWAY BAR INCLUDES LCA'S, LINKS, HARDWARE, MOUNTS

INSTALLATION KIT, 5/8 INCH DIAMETER SWAY BAR, FOR CARS NOT IRIGINALLY FITTED WITH SWAY BAR. HARDWARE TO INSTALL A SWAY BAR ON A CAR NOT EQUIPPPED WITH 1. DOES NOT INLUDE SWAY BAR INCLUDES LCA'S, LINKS, HARDWARE, MOUNTS

INSTALLATION KIT, FOR 7/8 INCH DIAMETER FRONT SWAY BAR, FOR CARS NOT ORIGINALLY FITTED WITH SWAY BAR. HARDWARE TO INSTALL A SWAY BAR ON A CAR NOT EQUIPPED WITH 1. DOES NOT INLUDE SWAY BAR INCLUDES LCA'S, LINKS, HARDWARE, MOUNTS

LINK, FRONT LH SWAY BAR

NUT, LUG NUT, LE WHEEL ONLY, 1977-1980. Required: 16

NUT, LUG NUT, ROSTYLE WHEEL FROM C158231, ON 1968 TO 1980. Required: 8

PIN, COTTER PIN UPPER SHOCK BOLT, REAR AXLE, TR2, TR3 TO TS13045, BRAKE PEDALS,. Included in 031-390 Top Trunnion kit
Required: 2

PIN, COTTER PIN, 9/64 X 2-1/4, FRONT WHEEL BEARING RETAINING. Required: 2

PIN, FULCRUM, UPPER SHOCK BOLT@ TRUNNION, on hold. Included in 031-390 Top Trunnion kit
Required: 2

REAMER, KING PIN BUSHINGS,MGB 1962-1980

REPAIR KIT, KING PIN SET ONLY, NO HARDWARE, DOES BOTH SIDES. Included in major suspension kit

SHIM, FRONT WHEEL BEARING .005, BJ8 FROM C26705, MGB. Required: A/R

SHIM, FRONT WHEEL BEARING .010, BJ8 FROM C26705. Required: A/R

SHOCK ABSORBER, FRONT REBUILT (ADDITIONAL Core Charge $75). Price includes a $75.00 core charge which will be refunded upon reciept of a rebuildable core.
Required: 2

SPINDLE SET, FRONT, SWIVEL AXLE SET, REBUILT, COMPLETE WITH ALL FITTINGS, HARDWARE, $120 CORE ADDITIONAL. Price shown includes a $100.00 core charge which will be refunded upon receipt of rebuildable core set

SPRING, COIL, FRONT, GT 1966-1974, CHROME BUMPER , MGA TWIN CAM, MKII DELUXE. Required: 2

SPRING, COIL, FRONT, RDSTR FROM 293446- ON, 1973-1980, GT 1975-1976, RUBBER BUMPER CARS. Required: 2

TUBE, DUST EXCLUDER, TOP. Required: 2

WASHER, ADJUSTMENT WASHER (.058-.063) -TRUNNION TO KING PIN. Included in major suspension kit & king pin set
Required: A/R

WASHER, ADJUSTMENT WASHER(.064-.069) TRUNNION TO KING PIN. Required: A/R

WISHBONE ARM, LOWER, FRONT & REAR ON NON SWAY BAR CARS, RH, LH REAR ON SWAY BAR CARS. Required: 4